Preston Offbox Multi Feeder Arm

Description

The Preston Innovations Offbox Multi Feeder Arm is built to give feeder anglers maximum stability, versatile positioning and fast bankside adjustment. Its single rotating fixing point lets you swing and lock your rod angle with one clamp, so there is no need to adjust multiple knuckles on your seatbox leg. A telescopic front arm, quick-release SnapLok fittings and a rear upright height-adjustment post let it adapt to both high-tip river setups and flat commercial venue fishing. - Mounting System: Single rotating 360-degree fixing knuckle - Front Arm: Telescopic length-adjustable extension - Fixing Blocks: Front and rear SnapLok quick-release blocks - Rear Upright: Height-adjustable upright post with integrated SnapLok block - Seatbox Leg Compatibility: Native 36mm round (supplied with 30mm insert) - Primary Use: Commercial Method feeder and natural venue river/lake setups - Single Rotating Mount: Complete directional control from a single leg clamp, allowing instant angle adjustment to suit wind, stream flow or peg layouts. - Telescopic Front Arm: Adjusts seamlessly in length to optimise rod tip position, keeping line tension accurate whether fishing short margins or long distance. - Dual SnapLok Blocks: Quick-release SnapLok blocks on both the front arm and rear upright allow feeder rests, buzz bars or back rests to be detached in seconds for easy transport. - Height-Adjustable Rear Upright: Provides vertical fine-tuning to elevate rod tips above marginal reeds or drop them low on windy commercial waters. - Rock-Solid Rock-Free Design: Rigorous clamping mechanisms eliminate rod tip bounce and wobble when setting the trap or striking at bites. - Commercial Feeder Tactics: Position your rod low and parallel to the water for tensioned Method, Hybrid or pellet feeder bites. - Natural Venue and River Fishing: Raise the front arm and rear upright high to keep mainline clear of marginal vegetation, undertow or river currents. - Fast Peg Setup: Leaves the main knuckle clamped to your seatbox leg while allowing you to unclip the main arm via SnapLok fittings for compact transportation in your carryall. Vibration Free Setup: Mount the main single rotating clamp onto a main front seatbox leg rather than a footplate extension arm whenever possible. Fixing closer to the main frame minimises transferred movement when you shift weight on your seatbox cushion, keeping your feeder tip rock-steady for spotting delicate drop-backs and micro-plucks. What seatbox leg sizes will this feeder arm fit? The Offbox Multi Feeder Arm fits standard 36mm round legs natively and comes supplied with a 30mm insert. It is also compatible with additional Offbox inserts (available separately) for 25mm round and 23mm square legs. Can I detach the arm without removing the knuckle from my seatbox leg? Yes. Thanks to the integrated SnapLok system, you can leave the main clamp attached to your seatbox leg and simply unclip the feeder arm itself for fast packing into your luggage. Does this arm support both front and back feeder rests? Yes. The front SnapLok block houses your primary feeder rest, while the rear upright post with SnapLok accommodates back rests or butt grips to lock the rod securely during violent method feeder takes.