The Daiwa Airity Pro 16m pole has been redesigned to perform even stiffer at full length than its predecessor, thanks to a combination of upgraded materials, Super MSG nanoplus technology and enhanced areas of additional power. The result is a sharper response and better balance — features that suit the increasingly common long and shallow approach — alongside the power and strength needed for high catch rate venues and big commercial fishery carp. The pole is supplied fitted with the improved 2.4m match kit. This is designed with a pre bore reinforcement and as two near equal length sections, so it folds back neatly for easy storage. The 4mm tip is fitted with a PTFE bush and is best suited to up to a No8/10 solid or Yellow/Pink Hydro. The reversible PHEX911 extends any of the three end sections (12m, 13.6m and 15.2m) and has been redesigned to be lighter, aiding balance when shipping back and forth. EVA foam nose cones make assembly far easier, especially when going to full length. The 13m edition features the improved PHEX89, providing versatility of finished length without having lengths of section behind you. The smaller PMP 5/6 and 7/8 reversible extensions are also upgraded in material spec and feature EVA nose cones. These aid reach when fishing short and provide a reinforced handling area, protecting main sections from unnecessary strain and compression. Each is included with either kit package. The slide easy benefit of ITS Taping has been extended to cover five sections, from the No4 to No8. The No9 to No11 are decorated and finished with Diamond Satin. - Super MSG nanoplus technology - V-Joint Alpha - Redesigned with more stiffness and power for commercial fisheries and bigger carp - Pole Only supplied fitted with improved 4.0mm match kit - Supplied with Super Light PHEX911 - No3 section fitted with PTFE nose cone - ITS taping from No4 to No8 sections - Diamond Satin slide easy paint on No9 to No11 sections