The Evolve Tackle Run Ring System Minus Kit is a semi-fixed and free running rig component set built around an angled Run Ring and a Bead. For a semi-fixed set-up, push the Run Ring over the Bead ribs to lock it in place, with the Running Sleeve left unused. The fitment of the Angled Run Ring on the “-” Bead is tuned for reliable release when used with weights or leads of 3oz and under. For a free running set-up, mount the Running Sleeve onto the line via the slot — there is no need to break the line or leader — and push it over the Bead ribs to lock it in place. With the Bead ribs covered, the Run Ring is prevented from engaging and runs free. The Bead features internal alignment features for the swivel, so it always assembles correctly for optimal performance, and this also provides thicker walls and extra protection. Its long tapering top section gives extra line and leader protection inside the Run Ring and smoothly guides the Run Ring into position when fished free running. That same tapering top section also accommodates rig tubing insertion, gripping it firmly in place. The low profile angled Run Ring allows the weight or lead to hang vertically, and is supplied with a Silicone Sleeve to cover the Weight Link, improving aerodynamics on the cast and helping to prevent tangles. The system is designed so that when fished semi-fixed, the Bead will always release the Run Ring before the swivel pulls out from the Bead. In the event of a line breakage, the line, leader or tubing will pull through the large bore of the Run Ring rather than the small bore of the Bead, which is essential for a safe set-up. The Ring is moulded in a hard plastic for a low friction and hard wearing set-up. The Bead and Running Sleeve are both moulded in the Evolve translucent ‘dark camo’ finish, to complement all the Evolve end tackle products and enhance rig concealment. - Available in six per pack