NuFish Novus Power 3000 Landing Net Handle 3m

Description

The NuFish Novus 3000 is a 3-metre, 2-section take-apart landing net handle built for speed and reliability on the bank. It suits silverfish anglers, F1 baggers and natural-water anglers who want a fast, responsive tool that holds up to non-stop match action. The handle has an ultra-slender profile, with a low-diameter butt section that cuts through wind and water resistance. The base of the handle is finished with an ergonomic soft-touch grip, giving a non-slip hold even when wet, cold, or covered in groundbait and fish slime. Despite the slim profile, the carbon wall thickness has been upgraded across both sections to prevent accidental crushing when the handle rests on a seatbox accessory arm. The critical stress point features heavy-duty double reinforcement around the brass thread fitting, which is both fully pinned and wrapped, so the thread will not twist, pull free or fail. - Brand: NuFish - Model: Novus 3000 - Total Length: 3.0m (approx. 10ft) - Construction: 2-Section Take-Apart (Put-Over Joint) - Material: High-Modulus Carbon with Upgraded Wall Thickness - Thread Type: Double-reinforced, pinned, and wrapped heavy-duty brass thread - Profile: Ultra-slender, low-diameter design for maximum agility - Grip Finish: Non-slip soft-touch grip at the base of the butt section - Target Species: Silverfish, F1s, Skimmers, Match Carp, and River Species Where it works best: - Commercial F1 and silverfish racing: the lightweight, slender design lets you manoeuvre the net quickly through the water, which suits high-speed match scenarios where fractions of a second per fish add up. - Natural canal and river venues: at 3.0m (10ft), the handle offers enough length for reaching over shoreline rocks, stepping down steep canal banks, or clearing near-side weed fringes. - Wading situations: as a 2-piece take-apart design, you can wade out with the full 3m length or remove the top section for a shorter, ultra-light handle when standing chest-deep in a river. Because the Novus 3000 is an ultra-slim take-apart handle, it is worth checking the joint fit periodically during a busy session. Pushing the sections firmly together avoids unwanted twisting or stress on the carbon wall when lifting larger fish out of the water. Take-apart handles are stiffer, slimmer and more responsive than telescopic handles. A telescopic handle naturally gets thicker towards the base, whereas the Novus 3000 keeps a low-diameter profile for better balance and wind-cutting speed. While it is designed as an agile silverfish and F1 handle, the upgraded wall thickness and double-reinforced brass thread give it enough backbone to scoop the occasional big match carp or river barbel. The pinned brass fitting uses the standard universal thread pitch, so it will screw into any net head from NuFish, Preston, Guru, Matrix or Daiwa.